Welcome to our websites!

Rotary Actuator DKX-D Series

Short Description:

DKX-D series The DKX-D series is widely used in tunnel drilling rigs, mining machinery and other heavy machinery, such as wet spray trolleys, drill jambo, rock bolting jumbo, scaling jumbo, three-way narrow-track forklifts, rescue vehicles, which are required to realize the working condition of heavy-duty mechanical cantilever swinging. 1. Standard working pressure: 21Mpa 2. Standard swing angle: 180°,360° 3. Driving torque: 1920N.M~42900N.M 4. Holding torque: 4900N.M~1100...


Product Detail

Product Tags

DKX-D series

d3

The DKX-D series is widely used in tunnel drilling rigs, mining machinery and other heavy machinery, such as wet spray trolleys, drill jambo, rock bolting jumbo, scaling jumbo, three-way narrow-track forklifts, rescue vehicles, which are required to realize the working condition of heavy-duty mechanical cantilever swinging.

1. Standard working pressure: 21Mpa
2. Standard swing angle: 180°,360°
3. Driving torque: 1920N.M~42900N.M
4. Holding torque: 4900N.M~11000N.M
5. Straddle bending moment:5200N.M~64400N.M
6. Cantilever bending moment:13400N.M~256500N.M
7. Axial load: 1400KG~8200KG
8. Radial load: 1800KG~11800KG
9. Torque output mode: single flange, double flange
10. Installation method: foot mounting, flange mounting

Balance Valve

Code reference for model selection

d4
Model 200,280,300,470,500,750,1000,1150,1400,1800,2500,4200
Standard rotation angle 180=180°, 360=360°
Special rotation angle Standard design with internal limit mechanism to limit the angle of rotation please indicate the required angle
Mounting type of actuator body FT= foot mounting   FF = flange mounting   RF= rear flange
Torque output form D= single flange   E= double flange
Accessories C= balance valve   O= without balance valve   B= cushion valve
Note: I. The rotary actuator can be installed with an angle encoder. Please specify it if necessary.
II. Special rotary actuator with non-standard rotation angle, torque and installation form, etc., can be customized.

DKX-D series foot mounting - performance and dimension parameter table

d5
Model 200 280 300 470 500 750 1000 1150 1400 1800 2500 4200
Torque 210 bar (Nm) Driving 1920 2820 3100 4750 5100 7340 10700 11500 14100 18600 24300 42900
Holding 4900 6800 5000 12000 8100 18000 26000 18500 35000 46000 59000 110000
Bending moment (Nm) Cantilever 5200 7100 7500 11900 12000 18400 29500 30000 38800 55900 72900 64400
Straddle 180º 13400 16900 17500 3080 31000 47800 75100 75000 90900 130500 170000 170000
360º 19200 24600 17500 45400 31000 71200 111500 75000 146000 197700 256500 170000
Load (KG) Axial 1400 1800 1800 2700 3000 3600 4500 7000 5900 6800 8200 8200
Radial 1800 2300 2500 6600 3600 5000 6800 7000 8200 10000 11800 11800
Displacement (cm 3) 180º 492 688 716 1180 1161 1870 2688 2680 3540 4654 6000 10200
360º 983 1390 1420 2360 2323 3740 5360 5360 7080 9325 12000 -
Weight (KG) 180º 34 .5 49 .9 60 72 .6 85 110 160 180 220 280 360 500
360º 45 .4 63 .5 75 100 110 140 200 240 290 370 455 -
Valve (optional) Balance valve Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Cushion valve Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Model 200 280 300 470 500 750 100 1150 1400 1800 2500 4200
D1 (Φ) 139 155 150 183 183 209 234 234 263 288 310 310
D2 (Φ) 140 152 177 178 202 203 229 265 254 279 305 305
F1 Metric M12 M16 M12 M20 M16 M22 M24 M22 M27 M27 M30 M30
Depth 18 23.9 18 30 24 33 36.1 33 40.6 40.6 44.9 44.9
F2 (quantity) 12 12 12 12 12 12 12 12 12 12 12 12
F3 (Φ) 115 125 120 150 133 170 195 170 215 240 255 255
F4 Metric M10 M12 M16 M16 M20 M20 M22 M24 M24 M24 M27 M27
Depth 15 18 25 23.9 35 30 33 36 36.1 36.1 40.1 40.1
F5 (quantity) 12 12 12 12 12 12 12 12 12 12 12 12
F6 (Φ) 108 120 125 133 150 150 170 195 190 210 230 230
F7 M16 M20 M22 M22 M24 M24 M24 M30 M30 M30 M36 M36
H1 (mm) 156 186 - 212 - 240 276 - 305 327 362 362
H2 (mm) 80 94.9 95 108 108 122 140 140 154 165 184 184
H3 (mm) 48 69.9 49 77.9 58 88.1 105 78 110 120 135 135
H4 (mm) 179 201 118.5 226 136 271 298 175 310 334 366 366
L1 (mm) 180º 298 323 323 365 365 413 475 475 524 551 600 906
360º 427 470 470 538 538 615 705 705 776 836 906 -
L2 (mm) 180º 261 286 292 323 323 363 431 431 463 493 534 848
360º 392 433 439 496 496 565 661 661 715 775 843 -
L3 (mm) 180º 75.2 134 - 143 - 130 152 - 185 196 221 374
360º 149 157 - 197 - 232 267 - 308 338 374 -
L4 (mm) 180º 229 248 248 281 281 314 374 374 400 426 460 766
360º 358 395 395 454 454 516 604 604 652 708 766 -
L5 (mm) 38.1 43.9 44 50 50 56.9 59.9 60 74.2 75.9 80 80
W1 (mm) 190 230 230 260 260 300 340 340 380 410 450 450
W2 (mm) 222 268 268 310 310 350 400 400 447 484 530 530
P1, P2 The 'G' series oil outlet is available in dimensions from 1/8 to 1. See the drawings for details.
V1, V2

DKX-D seriesn rear flange mounting-performance and dimension parameter table

d6
Model 200 280 300 470 500 750 1000 1150 1400 1800 2500 4200
Torque 210 bar (Nm) Driving 1920 2820 3100 4750 5100 7340 10700 11500 14100 18600 24300 42900
Holding 4900 6800 5000 12000 8100 18000 26000 18500 35000 46000 59000 110000
Bending moment (Nm) Cantilever 5200 7100 7500 11900 12000 18400 29500 30000 38800 55900 72900 64400
Straddle 180º 13400 16900 17500 3080 31000 47800 75100 75000 90900 130500 170000 170000
360º 19200 24600 17500 45400 31000 71200 111500 75000 146000 197700 256500 170000
Load (KG) Axial 1400 1800 1800 2700 3000 3600 4500 7000 5900 6800 8200 8200
Radial 1800 2300 2500 6600 3600 5000 6800 7000 8200 10000 11800 11800
Displacement (cm 3) 180º 492 688 716 1180 1161 1870 2688 2680 3540 4654 6000 10200
360º 983 1390 1420 2360 2323 3740 5360 5360 7080 9325 12000 -
Weight (KG) 180º 34 .5 49 .9 60 72 .6 85 110 160 180 220 280 360 500
360º 45 .4 63 .5 75 100 110 140 200 240 290 370 455 -
Valve (optional) Balance valve Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Cushion valve Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional
Model 200 280 300 470 500 750 1000 1150 1400 1800 2500 4200
D1 (Φ) 200 235 235 280 280 315 355 365 396 442 475 475
D2 (Φ) 150 175 175 205 205 230 260 260 290 315 340 340
D3 (Φ) 139 155 150 183 183 209 234 234 263 288 310 310
D4 (Φ) 140 152 177 178 202 203 229 265 254 279 305 305
F1 Metric M 12 M16 M16 M20 M20 M22 M24 24 M27 M27 M30 M30
Depth 18 23. 9 23 30 35 33 36. 1 36 40. 6 40. 6 44. 9 44. 9
F2 (quantity) 12 12 12 12 12 12 12 12 12 12 12 12
F3 (Φ) 115 127 125 149 150 171 195 195 216 240 254 254
F4 M 10 M 12 M 13 M 16 M 17 M20 M22 M23 M24 M27 M30 M30
F5 (quantity) 12 12 12 12 12 12 12 12 12 12 12 12
F6 (Φ) 175 206 205 245 245 275 310 310 345 380 410 410
H1 (mm) 99. 1 106 118. 5 118 136 131 144 167.5 156 169 182 182
L1 (mm) 180º 298 298 323 365 365 413 475 475 524 551 600 906
360º 427 427 470 538 538 615 705 705 776 836 906 -
L2 (mm) 180º 261 283 292 323 323 363 431 431 462 493 534 840
360º 390 430 439 496 496 565 661 661 715 775 839 -
L3 (mm) 180º 75. 2 134 - 142 - 130 152 - 184 199 221 374
360º 202 157 - 197 - 232 267 - 308 340 374 -
L4 (mm) 25. 2 25. 9 26 30. 9 31 33 40. 1 40 41. 9 45. 9 52 52
L5 (mm) 26. 9 32 32 35. 1 35 41. 9 40. 1 40 53. 1 54. 1 55. 9 55. 9
P1, P2 The 'G' series oil outlet is available in dimensions from 1 / 8 to 1. See the drawings for details.
V1, V2

  • Previous:
  • Next:

  • Write your message here and send it to us