Welcome to our websites!

Rotary Actuator DKX-DT Series

Short Description:

DKX-DT Series (Tilter & Tilting Quick Change) Tilt any bucket or attachment to a maximum of 180° Construction machinery is the traditional application area of our hydraulic rotary actuator. This series is designed for providing multi-free operation for the front-end tools of engineering construction machinery, such as the swing of the excavator bucket, the adjustment of the drill angle, etc., which can greatly expand the scope of use of existing equipment. The tilter + quick-ch...


Product Detail

Product Tags

DKX-DT Series (Tilter & Tilting Quick Change) Tilt any bucket or attachment to a maximum of 180°

dt2

Construction machinery is the traditional application area of our hydraulic rotary actuator. This series is designed for providing multi-free operation for the front-end tools of engineering construction machinery, such as the swing of the excavator bucket, the adjustment of the drill angle, etc., which can greatly expand the scope of use of existing equipment. The tilter + quick-change combined product can easily realize the multi-functionality of the existing construction equipment, which can greatly improve the construction efficiency and reduce the procurement cost of construction equipment. For example, the excavator's excavating shovel by means of the DKX-DT series rotary actuator can rotate at an angle according to the slope inclination requirement, then carry out excavation work, and finally achieve the required slope once. When the DKX-DT series is equipped with a quick-change device, the same excavator can be quickly replaced with other front-end attachments, with achieving a maximum tilting function of 180°and multi-functionality purposes, which significantly simplifies the construction process and saves construction time. Construction machines equipped with the DKX-DT series can be used for the following work:

Horticultural and agricultural work, demolition/loosening work, foundation work, slope work, embankment work, road construction, excavation work, building backfill, soil excavation, disaster relief, etc.

Balance Valve

dt3

DKX-DT series selection and performance parameter table

dt4

Note: In order to prevent the pressure of the hydraulic bucket tilter from being too high, a two-way overflow valve is integrated inside the rotary actuator to prevent damage to the rotary actuator due to excessive load; the factory setting pressure of the two-way overflow valve is normally 19MPA (this valve is not available in DT-01 and DT-02).

Model

Rotation angle

Maximum working pressure (bar)

Maximum working torque 150bar/Nm Maximum holding torque 190bar/Nm

Volume (L)

Weight (KG) Cooperating with excavator (T)
DT-01

100°

190 800 2100

0.18

19 <1.8

140°

0.25

21

180°

0.323

22
DT-02

100°

190 1100 4300

0.284

42 1.8~3.5

140°

0.399

47

180°

0.513

52
DT-03

100°

190 2000 6600

0.385

51 3.0~5.5

140°

0.538

57

180°

0.693

62
DT-04

100°

190 3400 9100

0.696

85 5.0~7.5

140°

0.974

94

180°

1.253

104
DT-05

100°

190 6950 16500

1.421

121 7.0~10.5

140°

1.98

135

180°

2.557

149
DT-06

100°

190 9600 31000

1.892

165 10~13

140°

2.649

183

180°

3.226

200
DT-07

100°

190 10500 34000

2.34

162 12~16

140°

3.281

180
DT-08

100°

190 16000 40000

2.519

200 15~23

140°

3.527

224
DT-09

100°

190 20000 43000

3.291

266 22~26

140°

4.61

301
DT-10

100°

190 23000 54000

3.967

322 25~29

140°

5.554

358
DT-11

100°

190 33000 90000

5.742

554 28~38

140°

8.039

605
DT-12

100°

190 43000 100000

7.969

666 37~50

140°

11.187

727

  • Previous:
  • Next:

  • Write your message here and send it to us